Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Spring Replacement Cost in Pasadena?
Spring replacement in Pasadena typically costs $180 – $340 per spring, and most jobs are finished the same visit. That range covers a standard torsion or extension spring on a single-car door; a two-car door with a matched pair usually lands closer to double, since both springs are replaced together. The written estimate you get before any work begins is the final price.
We work on LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor systems regularly, so we already know how your door is built before we arrive. Springs are under extreme tension, and a snapped one can leave a door stranded halfway up. If that’s you today, call (855) 337-1170 and we’ll get someone out to look at it.
Quick Answer
- One spring: $180 – $340, parts and labor included.
- A matched pair on a two-car door: about twice the single-spring range.
- Written estimate: free, given before any work begins, and it sets the final price.
- Safety note: torsion and extension springs store enormous energy. This is not a job for a ladder and a video.
- Same-day service: available for most spring calls in Pasadena.
Spring Replacement Cost Breakdown (2026)
Here’s how the numbers stack up for a typical residential spring job in Pasadena. These are estimated ranges for the local market in 2026, not a quote. Your written estimate is the number that counts.
| Line Item | Typical Estimated Range | Notes |
|---|---|---|
| Torsion spring replacement (one) | $180 – $340 | Most common setup on newer sectional doors |
| Torsion spring pair (matched set) | About twice the single-spring range | Replaced together; both springs carry the door |
| Extension spring replacement | $180 – $340 | Older doors and some single-car setups |
| Spring plus cable repair | Add $130 – $250 for the cable | A snapped spring often takes a cable with it |
| Spring plus roller replacement | Add $110 – $220 | Worth bundling if rollers are worn |
| Spring plus track realignment | Add $120 – $240 | Common after a door drops off track |
| Full garage door repair call | $150 – $600 | For jobs where the spring is only part of it |
| Opener repair (if the opener took the strain) | $120 – $320 | Diagnosed on site |
What pushes a spring job toward the higher end? The weight and size of the door, whether it’s a torsion or extension system, and whether anything else failed when the spring went. A snapped spring sends the door crashing down hard, and that impact can bend a track, break a cable, or strip a roller. We check the whole door on the visit rather than swapping one part and leaving. What keeps it lower? A straightforward single-spring swap on a standard door with nothing else wrong.
What Affects Spring Replacement Pricing in Pasadena
Spring pricing isn’t a flat rate. Here’s what actually moves the number on a Pasadena door.
- Spring type. Torsion springs mount on a shaft above the door; extension springs run along the sides. Both fall into the same $180 – $340 range, but the two take different tools and different setups, so the estimate follows the door in front of us.
- Door weight and size. A heavy wood or insulated door on a two-car opening needs bigger springs than a light single-car panel door. Heavier doors mean more tension, more load, and sometimes more than the standard sized spring.
- How many springs you have. Many Pasadena doors run two springs so each one carries half the load. When one fails, we usually recommend replacing the pair, since the second spring is carrying the full weight on its own and is almost certainly worn.
- Damage caused by the failure. Springs don’t usually fail quietly. The door can come down off track, and the opener can get slammed by the sudden load. If a cable, roller, track, or the opener is compromised, that’s added cost on top of the spring.
- Door condition and age. Rusted or worn hardware takes longer to work on. Pasadena’s humid stretches can take a toll on metal that hasn’t been lubricated, and hardware that’s seized or rounded out adds time to the job.
- Access and door height. An eight-foot door with a low-clearance opener takes more careful setup than a standard seven-foot door. Steep single-car tilt doors and unusual hardware setups can also add a bit of labor.
How to Save on Spring Replacement
There’s no discount code for a snapped spring, but a few smart moves keep the bill closer to the low end of the range.
- Get a written estimate first. Free, upfront pricing before any work starts means no surprises. Call (855) 337-1170 for yours.
- Fix it before it spreads. A spring that’s just starting to sag is a cheaper fix than a door that’s dropped out of the track and broken a cable. If the door feels heavier than it used to, get it looked at.
- Replace the pair, not the survivor. A single failed spring on a two-spring door almost always means the other one is on borrowed time. Doing both at once saves the labor of a second visit.
- Bundle worn parts. If rollers, cables, or bearings are also tired, replacing them in the same visit avoids paying a second service call later.
- Keep the hardware moving. Regular lubrication on springs, rollers, and hinges keeps metal from seizing, and a door that moves freely wears its springs less.
One thing we’ll say plainly: don’t reach for the savings on the spring itself. An undertensioned or mismatched spring makes a door feel light but leaves it failing fast. And don’t attempt the swap yourself. Torsion and extension springs are among the most dangerous components in a garage, and a mishandled wind puts serious energy in motion. Let a trained technician handle it.
Why the Estimate Varies Between Companies
Two quotes for the same spring can differ for reasons that have nothing to do with the price of the part. The spring itself is a modest cost; the difference is what comes with it. Some companies quote a spring but don’t check the balance of the door, the condition of the cable and drum, or whether the opener will take the load after the repair. That’s a job that can look cheap and then need a second visit.
We quote the full picture: the spring, an inspection of the surrounding hardware, and a balance test on the door once it’s back under tension. Our technicians have up to 15 years of experience with LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor systems, and that shows up in the estimate as accuracy rather than padding. A free estimate is our read on the job, and the written number is what you pay.
Repair or Replace? What We Usually Recommend
For most Pasadena homes, a spring replacement is the right call, not a new door. The spring is a wear item, and swapping it restores the door. A full replacement usually makes sense only when the door itself is failing: bent panels, a deeply rusted frame, a structure that no longer matches the track, or a design so old that parts are hard to source.
If you’re facing that decision, the wider Pasadena Garage Door Repair Co repair team can walk the door with you and give an honest read on which side of the line you’re on. A new door installation typically runs $700 – $2,200, so the math only works if the old door is truly done. For a spring-only problem, replacement is almost always the cheaper answer.
What Happens During a Spring Replacement Visit
Knowing what a normal visit looks like takes some of the unknown out of the phone call. When a technician arrives for a spring job, the first step isn’t the spring: it’s the door. We check balance, listen to the opener, and look at the cables, drums, hinges, and rollers. Then the door’s tension is released safely using the right tools, the failed spring comes off, and a new one goes on.
Once the door is back under tension, we balance it and test the opener. If something else failed when the spring went, that’s when we flag it and talk through options before touching anything. A straightforward spring swap is usually done the same visit. Jobs that include cable or track work take a bit longer. We also cover spring replacement for tilt doors and older extension-spring setups, which run a different procedure than torsion but the same care.
Signs Your Spring Is About to Fail
Springs rarely fail with no warning. Most doors give some notice. Watch for a door that suddenly feels much heavier when you lift it by hand (with the opener disconnected and the door closed), a gap or visible break in the spring coil, a garage door that only opens partway, a loud bang from the garage, or a door that hangs crooked. Any of those is a reason to stop using the door and get it checked. Running a door with a failing spring puts extra load on the opener and can bring the door down unexpectedly.
If you’ve heard a bang and the door won’t lift, that’s the classic snapped-spring scenario. Hold off on forcing it and give us a call. Pasadena Garage Door Repair Co covers emergency service for exactly these moments.
Spring Replacement vs. Other Garage Door Repairs
Springs are one of five things that commonly fail on a garage door, and it helps to know which one you’re dealing with before you call. A door that won’t lift from the closed position is usually a spring. A door that hums but doesn’t move, or moves in jerks, often points to the opener. A door that’s hard to lift but you can lift by hand is usually a spring that’s losing tension. A door that binds or rubs is usually a track or roller issue. And a door that won’t close all the way can be a sensor, a limit setting, or a damaged panel.
Since we cover repair, opener repair, spring repair, installation, and emergency calls under one roof, we can diagnose and fix most of these on the same visit rather than sending you to a second specialist. If you’re not sure which failure you’re looking at, describe what the door does when you press the button and we’ll tell you which service to book.
FAQs – Spring Replacement Cost
How much does a garage door spring replacement cost in Pasadena?
A single spring replacement in Pasadena typically runs $180 – $340. A matched pair on a two-spring door is usually about twice that. Call (855) 337-1170 for a free estimate on your specific door.
Is it cheaper to repair or replace a garage door with a broken spring?
Repair is almost always cheaper. Replacing one spring runs $180 – $340, while a new door installation runs $700 – $2,200. A new door only makes sense when the door structure itself is failing, not just the spring. Call (855) 337-1170 and we’ll tell you which side your door is on.
Do I need to replace both springs if only one broke?
Usually, yes. On a two-spring door, the surviving spring has been carrying double its share of the load since the other broke, so it’s close to failing on its own. Replacing the pair costs about twice the single-spring range but saves a second visit and a second labor charge. Call (855) 337-1170 to confirm what your door has.
Can you come out today for a broken spring in Pasadena?
Same-day service is available for most spring calls, and emergency garage door repair is a core service for us, not an add-on. If your door is stuck open, blocking a car in, or at risk of coming down, call (855) 337-1170 right away and we’ll find the soonest slot.
Why does my spring cost more than the price I saw online?
Online prices are often for the spring alone, without labor, without inspecting the surrounding hardware, and without a balance test once the door is back up. Our estimates are for the full job in Pasadena, written before any work starts. Call (855) 337-1170 for a free, no-pressure estimate.
Cost of Other Common Garage Door Repairs in Pasadena
It helps to see spring pricing next to the other common repairs, so you know what a quote should look like if a spring failure took something else with it.
- Garage door repair (general): $150 – $600
- Cable repair: $130 – $250
- Opener repair: $120 – $320
- Opener installation: $250 – $550
- Panel replacement: $250 – $500
- Track realignment: $120 – $240
- Roller replacement: $110 – $220
- New door installation: $700 – $2,200
None of these are bundled into the spring price. If your door needs a spring and a cable, you’ll see both lines on the estimate, which is the honest way to price it. We’d rather quote the real job than a low number that grows on the day.
When to Call a Professional
Springs are one of a handful of garage door repairs that genuinely need a trained professional. High-tension torsion springs and extension springs store enough energy to cause serious injury if they release unexpectedly, and the tools for the job (winding bars, proper brackets, controlled tension release) aren’t things a homeowner keeps in a toolbox. Waiting or forcing a door with a broken spring also risks damage to the opener and the door itself. If your door is stuck, don’t force it. Call a trained technician.
If you’re in Pasadena and the door is stuck, off its track, or refusing to open, we can help. Emergency or planned, we cover it.
Contact Us for a Free Spring Estimate
Have a spring that’s snapped or a door that feels heavier than it used to? Call (855) 337-1170 for a free estimate. We’ll walk through the job, give you a written price, and get your door back up and running. Our technicians have up to 15 years of experience on LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor systems, and we’re ready to help this week.
Pricing reflects the Pasadena market as of 2026. Pasadena Garage Door Repair Co offers free estimates – call (855) 337-1170.
What Our Customers Say
"Opener kept reversing halfway down. Turned out to be the safety sensors knocked out of alignment by a bicycle. He straightened them, wouldn't charge me for it, and just asked me to keep them in mind if I need real work later."
- Yolanda Herrera"Spring snapped at six in the morning with my car sealed inside and me due at work. Somebody was here by eight thirty and had it fixed that morning. Door's quieter now than it was before it broke."
- Veronica Martinez"The old chain drive sounded like a freight train through the bedroom above the garage. Went with the belt drive they recommended and now I genuinely cannot hear it open from upstairs."
- Stephanie Meyer